Software
Toys
User Guides

How to use [toyname]

Getting Started

Turning On/Off:

Press the top button down hard and hold for 3-5 seconds. It will vibrate for one second when turned on.

Standard toy levels

Charging

Turn off the device before charging. The cable can be plugged into any USB port or USB/AC power adapter to start charging. It will take approximately 90 minutes to fully charge.

The indicator light will stay on while charging. Once it is fully charged, the solid red light will turn off. If you're unsure whether it's fully charged, you can view the battery indicator in the app.

Note:

Push the pin firmly, but slowly into the charging port. Stop pushing when you see the indicator light glow.

Cleaning & Care

· Clean your device before and after each use.

· Clean with warm water and mild soap (or a sex toy cleaner).

· You can rinse Domi. DO NOT allow water to drip inside the charging port.

· Dry thoroughly before storing.

· Keep away from extreme heat or cold.

· Make sure your toy is recharged at least once every six months.

Lubricant

Use lube at your own discretion. Only use water-based lube, as silicone or oil based lube may affect the silicone casing.

App Download

Compatible with:

iPhone/iPad/iPod Touch iOS 11.0 and later

Android 5.0 and later (with Bluetooth 4.0 enabled)

Mac (with Bluetooth 4.0 enabled)

Windows PC (needs a Lovense USB Bluetooth Adapter to connect )

iPhone/iPad v 3.7.7
Mac v 1.6.9
Windows PC v 1.6.9

Pairing with Your Devices

Pair with iOS/Android/Mac

1. Press and hold [toyname]'s ON/OFF button to turn on the toy. A light will flash to indicate it's on and ready to pair.

2. Click the Pairing Your Toy icon on the Lovense Remote app. icon.

3. Tap "+" to begin searching. After the toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your smartphone.

Note:

· You only have to pair your toy once. Next time it should automatically connect to your smartphone.

· This icon Icon that indicates your toy is paired with the Lovense Remote app. shows the signal of the connection. It will switch to this one Pairing Your Toy icon on the Lovense Remote app. if it disconnects. If paired, it will automatically reconnect.

Pair with PC

1. Press and hold [toyname]'s ON/OFF button to turn on the toy. A light will flash to indicate it's on.

2. Plug the Lovense USB Bluetooth Adapter into a free USB port on your computer.

3. Click the Pairing Your Toy icon on the Lovense Remote app. icon.

4. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your PC.

How To Program

How To Program

1. After successfully pairing [toyname] to your phone, tap on the [toyname] panel in the My Toys section.

2. Tap "Program" button to see the programming options.

3. Tap "Adjust Levels" to adjust the first three levels.

4. Tap "Create New Pattern" to add a preset pattern onto [toyname].

Troubleshooting

Lovense Gift

This order has been cancelled.

We will initiate a refund that should reach you within 7-10 working days.

OK

This order has already been shipped out. You can’t cancel it now. Please contact us for further assistance.