Software
Toys
User Guides

How to use [toyname]

Getting Started

Button Instruction:

Turn On/Off ------- Press and Hold Button A (for 3 seconds)

Tap Button A ----- Toggles Vibration Speeds

Tap Button B ----- Toggles Air Pump Settings

Air Pump Details:

Level 1 : Subtle Contractions

Level 2 : Mild Contractions

Level 3 : Deep Contractions (tightest)

Charging

Turn off the device before charging. The cable can be plugged into any USB port or USB/AC power adapter to start charging. It will take approximately 2 hours to fully charge. Once it is fully charged, the solid red light will turn off.

Note:

It is a magnetic charger and will only work if positioned correctly. When attempting to charge, if a solid red light doesn't turn on, rotate the cable 180 degrees. DO NOT use the toy while charging.

Cleaning & Care

· DO NOT boil in water (the battery may explode or water could leak into the toy).

· Clean with warm water. Do NOT use soap on the inner sleeve, as it may degrade the material.

· Dry thoroughly before storing.

· Keep away from extreme heat or cold.

· Make sure your toy is recharged at least once every six months.

Usage Tip

Air Vent

If the toy is too tight, locate the air vent which is on the opposite sides of the buttons. During use, try rythmically covering and uncovering the vent- it may improve the sensation.

Lubricant

Before insertion, generously apply lube to the inside of the sleeve, the entry hole and your penis. Water based lube may dry out quickly, so you may need to reapply. We recommend using Lovense Water-Based Lubricant for the best experience.

App Download

Compatible with:

iPhone/iPad/iPod Touch iOS 11.0 and later

Android 5.0 and later (with Bluetooth 4.0 enabled)

Mac (with Bluetooth 4.0 enabled)

Windows PC (needs a Lovense USB Bluetooth Adapter to connect )

iPhone/iPad v 3.7.7
Mac v 1.6.3
Windows PC v 1.6.3

Pairing with Your Devices

Pair with iOS/Android/Mac

1. Press and hold [toyname]'s ON/OFF button to turn on the toy. A light will flash to indicate it's on and ready to pair.

2. Click the Pairing Your Toy icon on the Lovense Remote app. icon.

3. Tap "+" to begin searching. After the toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your smartphone.

Note:

· You only have to pair your toy once. Next time it should automatically connect to your smartphone.

· This icon Icon that indicates your toy is paired with the Lovense Remote app. shows the signal of the connection. It will switch to this one Pairing Your Toy icon on the Lovense Remote app. if it disconnects. If paired, it will automatically reconnect.

Pair with PC

1. Press and hold [toyname]'s ON/OFF button to turn on the toy. A light will flash to indicate it's on.

2. Plug the Lovense USB Bluetooth Adapter into a free USB port on your computer.

3. Click the Pairing Your Toy icon on the Lovense Remote app. icon.

4. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your PC.

If you are using Max and have the old generation dongle Old generation dongle by Lovense that is already no longer being produced., use the following guides to pair with your PC:

Connect and Play

Connect and Play

1. Go to the "Long-Distance" tab in Lovense Remote app.

2. Tap "+" to add a contact. Enter their username and tap "Add."

3. After your partner accepts the request, they will show up in this tab.

4. When messaging, press the "+" button to connect with your partner. Long-distance sex is available via the "Sync Together" or "Video Chat" button.

5. Click the two arrow icon (at the bottom) to change how the toys sync together.

6. Click the "Long-Distance Sex" or "Remote Control" button to switch between those modes.

Troubleshooting

Lovense Gift